LOCATION:HOME > ENGLISH > PRODUCT > Fancy plywood/MDF >

Delonic Regia Fancy Plywood

Delonic Regia Fancy Plywood

Reference FOB Price
300-500USD/CBM
Specifications: 1220MM*2440MM;1000MM*2135MM;915MM*2135MM;or Customize
Material: Poplar;Combi;Eucalyptus;MDF;Chipboard
Glue: E0,E1,E2,Others
Min.order: 1*40HQ
Delivery Time: 20 Days After Deposit
Payment: L/C,T/T,D/P

Product DetailsFAQ


PRODUCT PROFILE

 

Fancy plywood, also called decorative plywood , is usually veneered with good-looking hardwood veneers , such as red oak, ash, white oak, birch, maple, teak, sapele , cherry, beech, walnut and so on . 

Fancy plywood is much more expensive than common commercial plywood . Generally speaking, the fancy face/back veneers (outer veneers) are about 2~6 times as expensive as common hardwood face/back veneers (such as red hardwood veneers, Okoume veneers, Red Canarium veneers, poplar veneers, pine veneers and so on) . In order to save costs, most of customers require only one side of plywood to be faced with fancy veneers and the other side of plywood to be faced with common hardwood veneers. Fancy plywood is used where the appearance of plywood is most important . So the fancy veneers should have good-looking grain and be top grade (A grade). Fancy plywood are very flat, smooth.

 

PRODUCT DETAIL

 

Quality Type

 Fancy Plywood

Face

Red Oak,Natrual Teak, EV Teak, EP Teak, Ash, Walnut, Cherry, Wenge, Beech, Maple, Ebony, Sapeli, Zabrawood, Rosewood, Apricot etc...

Back

Poplar/Hardwood

Core

 Poplar, Hardwood, Combi, Eucalyptus

Grade

A, AA, AAA

Glue

MR glue,E1,E2

Size(mm)

1220×2440, 915*2135, other door size, or as requested

Thickness(mm)

1.6mm-5mm or as your requested

Moisture

8-16%

        Packing

Standard pallet packing:

Inner plastic bags,outer three-plys or paper box, wrapped with steel tapes by 4x6 lines for reinforce

Usage

Interior Decoration, Furniture

Supply Ability

About 1000CBM per week

         MOQ

20FT Container, about 24CBM

Payment Terms

1. 100% L/C at sight

2. 30% T/T in advance, 70% L/C at sight

3. 30T/T in advance, 70 T/T at sight of BL copy

Delievery Time

Within 20 days after receiving 30% deposit or original L/C at sight


 

PRODUCT IMAGE

 

We CHANTA GROUP look forwords to your message!

Product:
Name:
Mobile:
Email:
Country:
Memo:
CAPTCHA: CAPTCHA
    

Ralated Products

  • What are the grades of plywood?Post time:2019-10-31

    What are the grades of plywood? There are four main types of plywood veneer grades. These are known as A, B, C, and D. Within each sheet of plywood, there are two grades present. This compound is writt...

  • Types of veneerPost time:2019-10-29

    There are a few types of veneers available, each serving a particular purpose. Raw veneer has no backing on it and can be used with either side facing up. It is important to note that the two sides wil...

  • How many times shuttering plywood should be used foPost time:2019-10-28

    The repetition actually depends on a couple of factors. Shuttering Plywood is a highly densified ply with plastic resin films on both sides of the surface to afford a smooth clean concrete finish in fo...

  • Is WBP plywood the same as marine plywood?Post time:2019-10-25

    It's a very common mistake to describe exterior plywood as "marine plywood." DIY and building shows on television seem to call any plywood "marine plywood." Over the years “marine” has become a gen...

  • What is common plywood made from?Post time:2019-10-22

    It's made from less expensive woods, like pine and poplar that are locally abundant. Better grades of plywood have a thin veneer (.050") glued on the primary visible side. Sometimes its on both sides. ...

  • How can I check the quality of plywood?Post time:2019-10-22

    Shouldn't have too much overlapping of these layers of plies while composing. The lines of different layers on the side profile of plywood should be running straight. If they overlap each other too muc...

  • What type of plywood is ideal for making furniture?Post time:2019-10-21

    Depends on the furniture application. If the furniture is bound to get exposed to steam or water regularly, go for Marine Grade Ply (Ask for I.S. 710 specification ). If not, such as cabinets or cupboa...

  • Is marine plywood stronger than regular plywood?Post time:2019-10-16

    Whether used as a floor or a subfloor, marine plywood resists rotting, warping and shrinking. It resists humidity from steam and can stave off absorbing stagnant water. It even holds up well against bo...

  • Where is plywood commonly used?Post time:2019-10-11

    plywood is used for a wide range of structural, interior and exterior applications - from formwork through to internal paneling. Plywood is an assemblage of wood veneers bonded together to produce a fl...

  • What is IS 710 plywood?Post time:2019-10-09

    What is IS 710 plywood? IS 710 is nothing but BWP (Boiling water proof) plywood. IS 710 mostly used in construction industry. It is not necessary to use in home interior product design. It can be used ...

Frendly link:

FACE VENEER CHANTA GROUP CHANTA ALIBABA BRANCH

[向上]