LOCATION:HOME > ENGLISH > PRODUCT > Commercial Plywood >

Poplar Plywood

Poplar Plywood

Reference FOB Price
250-350 USD/CBM
Specifications: 1220MM*2440MM;1250MM*2500MM or 1220MM*2500MM;915MM*2135MM Customize;
Material:
Glue: E0,E1,E2,Others
Min.order: 1*40HQ
Delivery Time: 20 Days After Payment
Payment: L/C,T/T,D/P

Product DetailsFAQ


Poplar Plywood Profile


   Poplar plywood has maximum moisture resistance, bending strength and durability. The symmetrically cross-bonded outer and inner layers are poplar veneer sheets. The grain of the outer surfaces may be either in the direction of the greater side of the panel or in the direction of the smaller side. In either case the first size is that of the grain direction. We offer both water resistant exterior poplar plywood and interior poplar plywood.

Poplar Plywood  application

   Poplar plywood can be used for building furniture, door and windows frames, carpentry and packaging. Poplar plywood is also suitable for usage in humid areas. Because of its relatively low weight it can be used to build high structural stresses in shop and interior fitting, shipbuilding, bathroom furniture, and also in vehicle construction.

Face/Back Okoume, Bintangor, Pencil Cedar, Keruing, Poplar, Birch,Pine,Maple, Hardwood, Ash, Oak and as your requested
Core: Poplar, Hardwood, Combi, Birch, eucalyptus, as your requirement.
Grade: BB/BB, BB/CC, CC/CC, CC/DD,DD/EE, etc.
Glue: MR/E0/E1/E2
Size(mm) 1220*2440mm
Thickness(mm) 2.0-25.0mm 1/8inch(2.7-3.6mm)
1/4inch(6-6.5mm)
1/2inch(12-12.7mm)
5/8inch(15-16mm)
3/4inch(18-19mm)
Moisture 16%
Thickness tolerance Less than 6mm +/-0.2mm to 0.3mm
6-30mm +/-0.4mm to 0.5mm
Packing Interior packing:0.2mm plastic;
Outside packing:bottom is pallets, covered with plastic film,around is carton or plywood, strengthen by steel or iron 3*6
Quantity 20GP 8pallets/21M3
40GP 16pallets/42M3
40HQ 18pallets/53M3
Usage Usage adequate for making furniture or construction, package or industry,
Minimum Order 1*20GP
Payment TT or L/C at sight
Delivery Time Within 15 days received deposit or original L/C at sight
Features:
1  wear-resistant,anti-cracking,anti-acid and alkaline-resistant
2  no color cotamination between the concrete and shuttering board
3  can be cut into small size for reusing.


Poplar Plywood  images




Poplar Plywood  package




We CHANTA GROUP look forwords to your message!

Product:
Name:
Mobile:
Email:
Country:
Memo:
CAPTCHA: CAPTCHA
    

Ralated Products

  • What are the grades of plywood?Post time:2019-10-31

    What are the grades of plywood? There are four main types of plywood veneer grades. These are known as A, B, C, and D. Within each sheet of plywood, there are two grades present. This compound is writt...

  • Types of veneerPost time:2019-10-29

    There are a few types of veneers available, each serving a particular purpose. Raw veneer has no backing on it and can be used with either side facing up. It is important to note that the two sides wil...

  • How many times shuttering plywood should be used foPost time:2019-10-28

    The repetition actually depends on a couple of factors. Shuttering Plywood is a highly densified ply with plastic resin films on both sides of the surface to afford a smooth clean concrete finish in fo...

  • Is WBP plywood the same as marine plywood?Post time:2019-10-25

    It's a very common mistake to describe exterior plywood as "marine plywood." DIY and building shows on television seem to call any plywood "marine plywood." Over the years “marine” has become a gen...

  • What is common plywood made from?Post time:2019-10-22

    It's made from less expensive woods, like pine and poplar that are locally abundant. Better grades of plywood have a thin veneer (.050") glued on the primary visible side. Sometimes its on both sides. ...

  • How can I check the quality of plywood?Post time:2019-10-22

    Shouldn't have too much overlapping of these layers of plies while composing. The lines of different layers on the side profile of plywood should be running straight. If they overlap each other too muc...

  • What type of plywood is ideal for making furniture?Post time:2019-10-21

    Depends on the furniture application. If the furniture is bound to get exposed to steam or water regularly, go for Marine Grade Ply (Ask for I.S. 710 specification ). If not, such as cabinets or cupboa...

  • Is marine plywood stronger than regular plywood?Post time:2019-10-16

    Whether used as a floor or a subfloor, marine plywood resists rotting, warping and shrinking. It resists humidity from steam and can stave off absorbing stagnant water. It even holds up well against bo...

  • Where is plywood commonly used?Post time:2019-10-11

    plywood is used for a wide range of structural, interior and exterior applications - from formwork through to internal paneling. Plywood is an assemblage of wood veneers bonded together to produce a fl...

  • What is IS 710 plywood?Post time:2019-10-09

    What is IS 710 plywood? IS 710 is nothing but BWP (Boiling water proof) plywood. IS 710 mostly used in construction industry. It is not necessary to use in home interior product design. It can be used ...

Frendly link:

FACE VENEER CHANTA GROUP CHANTA ALIBABA BRANCH

[向上]