一. How to install laminate flooring？
1. Clean the ground
First, clean the floor of the room to be constructed to ensure that there are no dead corners. If it is not cleaned, the floor will make noise.
2. Leveling the ground
The deviation of the ground horizontal line should not be greater than 2 mm. If it exceeds, it must be leveled. If the surface is not flat, the foot feel of the floor will become unnatural.
3. Lay the bottom layer
After cleaning, lay the moisture-proof layer first, which can prevent the water vapor from being affected by the rainy season. When laying, it must be flat and the seams are neat.
4. Use glue
In order to ensure the aesthetics of the floor covering, special glue must be used when pasting, and it is also necessary to ensure that the pasting is correct.
When laying the floor, it is necessary to cross the short board and the long board to ensure the stability of the floor. After the splicing is completed, tools need to be used to fasten it.
6, pry reinforcement
After a whole piece of construction is completed, you can take a useless piece of board to stabilize the floor that has been laid, and then use a tool to pry it inside to make sure it is fully fastened.
7. Configure the bead
After the floor is installed, it must be equipped with battens. In normal homes, the floor is higher than the ground, and high and low pressure strips need to be configured. If the floor and the ground are flat, then flat battens should be configured.
8. Install the bead
When installing the bead, be sure to fasten the connection between the bead and the floor, and tighten the screws, otherwise there will be a problem of loosening after a long time.
The above are the installation steps of the laminate floor. From the above article, we can see that the installation steps are relatively complicated. In order to ensure the smooth construction and the quality of the project, we must strictly implement it during the actual operation. The preparations before construction and after construction The maintenance work must be in place, so as to reduce a lot of unnecessary troubles, save more time and energy, and hope to help everyone.