Marine plywood is made of harder wood, here is Okoume wood from Africa, which is composed of rotary cutting and then gluing and compressing. The same wood section, the other part of the wood is sawn to the same width as the finished product, so that the wood grain can be cross-laminated, thereby increasing the strength of the board. After cutting, the wood segments enter the peeling machine along the conveyor belt, and the wood segments are cut into thin slices. The blades on both sides of the peeling machine are responsible for trimming the two sides of the laminate. Then pull apart to form independent laminates, which are cut according to the size of the finished product, and then the workers put the first layer of dry laminates on the bottom, followed by the second layer of glue-coated laminates, and the third layer. The dry laminates are placed on top, and the next two layers are laid in the same way to ensure that they can be better cross-laminated. Then these laminated panels are put into a hot press and pressed into a strong plywood. Layers The boards are flattened and tightly bonded, and then a thin layer of plywood is pressed on the surface for decoration, and the process of making the ocean board is over.