After Service: Europe:+8615910174879
Language
Reference FOB Price | |
---|---|
Specifications: | 1220MM*2440MM;1250MM*2500MM or 1220MM*2500MM;915MM*2135MM Customize; |
---|
Material: | Pine;Pine&Eucalyptus;Poplar |
---|---|
Glue: | E0,E1 |
Min.order: | 1*40HQ |
Delivery Time: | 20 Days After Deposit |
Payment: | L/C,T/T |
PRODUCT PROFILE
Laminated veneer lumber (LVL) is an engineered wood product that uses multiple layers of thin wood assembled with adhesives. It is typically used for headers, beams, rimboard, and edge-forming material. LVL offers several advantages over typical milled lumber: Made in a factory under controlled specifications, it is stronger, straighter, and more uniform. Due to its composite nature, it is much less likely than conventional lumber to warp, twist, bow, or shrink. LVL is a type of structural composite lumber, comparable to Glued laminated timber (Gluelam) but with a higher allowable stress.
PRODUCT DETAIL
Materials |
poplar / hardwood / pine or as request |
glue |
WBP,MR, Melamine |
Popular sizes |
38x225x3900mm/6000mm 40x235x3900mm/6000mm 42x230x3900mm/6000mm length can be up to 12000mm |
F&B |
polishing,non-slip, construction workers more secure |
Edge processing |
Four long edges will be chamfered to convenient and safe holding |
Profile |
two sides press mark as customer's request |
Joint way |
overlap joint,end joint,scarf joint,finger joint |
Moisture content |
8%~12% |
Density |
580-620kgs/cbm |
Standard |
OSHA,ANSI A10.8(US), BS24829(UK), AS1577(AUS) |
Advantage |
LVL strength is three times of the same size solid wood,which is more suitable for load-bearing use |
Certificate |
ISO901-2000,CE,FSC |
packing |
Standard export packing |
Min order |
55cbm/40HQ |
Trade Terms |
FOB,CNF,CIF,EXW |
payment |
T/T or L/C at sight |
Delivery time |
15~20days after receiving the deposit or L/C |
PRODUCT IMAGE
Una capa de membrana se adhiere a la superficie de la plantilla de construcción durante el proceso de producción, por lo que la superficie tiene un buen rendimiento a prueba de agua y acelera el perí...
What are the advantages of film faced plywood? 1. Light weight: It can greatly save materials, reduce workload and save time, and reduce users Low cost, improve the quality of construction proj...
Advanced materials 1. A new generation of flame-retardant OSB board is made of imported pine wood sliced into slices. The pine wood has a uniform structure, strong permeability, and is extremely eas...
The size of the plywood used for the roof is usually 1220*2440mm The usual length and width specifications of plywood are: 1220×2440mm, and the thickness specifications are generally: 3, 5, 9, 12, ...
High-density fiberboard (abbreviated as HDF) is a kind of board made of wood fiber or other plant fiber, applied with urea-formaldehyde resin, or other synthetic resin under heating and pressurizing co...
OSB board is made of small-diameter wood, thinning wood, and wood core as raw materials. Long-length shavings are processed by special equipment, generally 40-100mm long, 5-20mm wide, and 0.3-0.7mm thi...
Waterproof plywood is also a kind of plywood, mainly used in outdoor construction environment. Many people think that waterproof plywood can be soaked in water for a long time, but this is not the case...
(1) Selection of raw materials and treatment of raw materials; (2) Veneer finishing; (3) Gluing; (4) Paving group blank; (5) Pre-press molding; (6) Spray paint; (7) Hot pressing...
1. Particle board is also called particle board. It cuts all kinds of branches, small diameter wood, fast-growing wood, sawdust, etc. into fragments of a certain specification, after drying, mixing wit...
Medium density fiberboard (abbreviated as MDF, abbreviated as MDF). Medium-density fiberboard is a kind of man-made board made of wood fiber or other plant fiber, after crushing, fiber separation, dryi...
We CHANTA GROUP look forwords to your message!